262T/TR Two Channel w/Timing Functions

Features & Benefits

• Two detector channels in a single unit
• The Winky-Blink™ loop monitor remembers and indicates intermittent and failed loops
• If intermittent or failed loops self-heal, the detector will resume normal operation without requiring a manual reset
• Loops are sequentially scanned, which helps eliminate crosstalk
• Thumbwheel switches for sensitivity settings
• Nine levels of sensitivity per channel
• Gold contact toggle switches on front panel for frequency and mode selections, increase long term reliability
• Three loop frequencies per channel
• Two selectable modes per channel:
- Pulse
- Presence
• Digital delay and extension timers for each channel:
-Delay time range is 0 to 63 seconds with 1 second steps
- Delay is indicated by the LED flashing at 4 Hz
- Delay inhibit control is connected to Ch. 1 - Pin 1 and Ch. 2 - Pin 2
- Extension time range is 0 to 15.75 seconds in 0.25 second steps
- Extension is indicated by the LED flashing at 16 Hz
• Self-tuning and complete environmental tracking
• Complete low power CMOS digital design
• Operates on a single DC power supply
• Transformer isolation for loops
• High intensity LED indicators
• Front panel width is 1.12 inches

Return to Detection Products